Dishwasher repair in Lanarkshire
Dishwasher faults often look worse than they are. Standing water usually points to a blocked filter or drain, dirty dishes to blocked spray arms, and a leak to a worn door seal or loose hose.
Common problems
- Water left in the bottom after a cycle
- Dishes come out dirty or gritty
- Leaks onto the kitchen floor
- Won't start, or stops part way through
- Dishes don't dry properly
- Spray arm doesn't turn, or the machine is very noisy
What to check first
- Clean the filter at the bottom of the tub, because food debris builds up there.
- Check the holes in the spray arms aren't blocked.
- Top up the dishwasher salt and rinse aid if your machine uses them.
- If the problem started after a new sink or waste fitting, check the dishwasher drain hose isn't blocked off by an unremoved knock-out plug.
When to call an engineer
Call an engineer if water leaks from the machine itself, the door won't latch, you get repeated error codes, or the machine trips the fuse.
Common questions
Can a built-in dishwasher be repaired where it is?
Most can be repaired in place. Some jobs need the machine pulled forward, so clear the space in front if you can.
Why does my dishwasher leave water in the bottom?
A blocked filter, a blocked drain hose or waste connection, or a failed drain pump are the usual causes. Cleaning the filter is the safe first step.
Where we cover
Ready to get it fixed?
Takes about a minute. Nothing to pay on the website.